Bush-hog 280 Bedienungsanleitung PDF herunterladen (Seite 19)

5-5 FRONT BELTING INSTALLATION

A. Align belting and clamp with holes in front lip

of deck.

B. Fasten with 3/8 x 3-1/2” capscrews, flatwash-

ers, lockwashers and nuts. (Figure 5-4)

5-6 REAR BAND INSTALLATION

A. Align deflector band with holes in rear band of

deck.

B. Fasten with 3/8 x 1” capscrews, flatwashers,

lockwashers and nuts. (Figure 5-4)

5-7 FRONT CHAIN INSTALLATION

A. Align front chain assembly bracket with holes

in front lip of deck.

B. Fasten with 3/8 x 3” capscrews, flatwashers,

lockwashers and nuts. (Figure 5-5)

5-8 REAR CHAIN INSTALLATION

A. Align rear chain assembly bracket with holes

in rear band of deck.

B. Fasten with 3/8 x 1-1/4” capscrews, flatwash-

ers, lockwashers and nuts. (Figure 5-5)

CAUTION

USE ONLY FACTORY APPROVED CHAIN

GUARDS.

WARNING

FOR NON-AGRICULTURAL USE, OSHA,

ASAE, SAE AND ANSI STANDARDS

REQUIRE THE USE OF CHAIN GUARDS OR

OTHER PROTECTIVE GUARDS AT ALL

TIMES. BUSH HOG STRONGLY RECOM-

MENDS THE USE OF SUCH GUARDS FOR

AGRICULTURAL USES AS WELL, TO

REDUCE THE RISK OF PROPERTY DAM-

AGE, SERIOUS BODILY INJURY, OR EVEN

DEATH FROM OBJECTS THROWN OUT OR

FROM CONTACT WITH THE CUTTING

BLADES.

Figure 5-4

Rear Band

Belting Clamp Front Belting

Figure 5-5

Rear Mount Bracket

Retaining

Rod

Chains

Front Mount

Bracket

Chains

Retaining Rod

Figure 5-6 Clutch Shield

Shield Mount

Gearbox

Patched Capscrew and Flatwasher

Locknut should be tightened enough to

prevent rattling, but loose enough to allow

raising the shield.

Capscrew, (2) Flatwashers and Locknut

1 2 ... 14 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

Bush-hog 280 Bedienungsanleitung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Bush-hog 280